-
Soakaway crate
— Modular plastic crate system enabling surface water to infiltrate into surrounding ground.
-
Soakaway repair
— Restoration of a failed soakaway to acceptable surface water disposal performance.
-
Soakaway replacement
— Removal of an old soakaway and construction of a new compliant system.
-
Soft-close hinge
— Damped hinge that lowers a toilet seat or lid slowly to avoid slamming.
-
Soil and vent pipe (SVP)
— Vertical pipe that carries foul waste and vents the system to atmosphere above the roof.
-
Soil pipe
— Vertical pipe carrying foul wastewater from toilets and waste fittings down to the drain.
-
Soil pipe boss
— Branch fitting on a soil pipe that accepts a waste connection from a basin, bath or sink.
-
Solder joint (capillary fitting)
— Copper pipe joint in which solder is drawn into a fitting by capillary action and heat.
-
Sonde receiver
— Handheld receiver used to locate the position and depth of a sonde transmitter.
-
Specialist contamination clean-up
— Specialist cleanup of hazardous contamination affecting drainage, requiring trained operatives.
-
Speedfit
— Brand of push-fit plastic pipe and fitting system used widely in UK plumbing.
-
Spot repair (drain)
— Short localised repair targeting a single defect inside a drain.
-
Spring rod
— Flexible coiled steel rod used to negotiate bends in drainage pipework.
-
Stack pipe
— Vertical drainage pipe collecting flows from multiple floors and discharging into the drain.
-
Stainless steel pipe
— Corrosion-resistant steel pipe used in commercial drainage and specialist applications.
-
Steam cure lining
— CIPP lining cured by steam introduced into the inflated liner to harden the resin.
-
Stop end
— Sealed cap fitted to the end of a drainage channel or pipe to prevent flow escape.
-
Stop tap (stopcock)
— Main valve isolating the cold water supply to a property for maintenance or emergencies.
-
Storm drain emergency
— Emergency response to surface water drains overwhelmed by intense rainfall or blockage.
-
Strap-on boss
— Retrofit fitting clamped onto a soil pipe to add a new waste connection point.
-
Structural condition grade
— WRc grade reflecting structural integrity of a drain, from minor flaws to severe damage.
-
Studio flat
— Single open-plan flat combining living, sleeping and kitchen spaces with one bathroom.
-
Subsidence drain survey
— Specialist drain survey carried out as part of investigating subsidence-related building movement.
-
SuDS attenuation crate
— Underground modular plastic crate system storing surface water for controlled discharge.
-
SuDS condition survey
— Survey assessing the condition and performance of Sustainable Drainage System components.
-
Sump pump
— Pump installed in a sump to remove water that collects below the natural drainage level.
-
Sump pump failure
— Emergency response to sump pump failure in basement or low-lying area, risking flooding.
-
Sump pump repair
— Repair or replacement of a submersible pump in a basement or surface water sump.
-
Sunken garden or driveway
— Localised ground depression caused by drain leakage washing away supporting soil.
-
Surface water drain
— Drainage pipe taking rainwater from roofs, driveways and yards to a soakaway or watercourse.
-
Surface water drain cleaning
— High-pressure cleaning of pipes carrying rainwater run-off from roofs and hard surfaces.
-
Surface water flooding
— Flooding from heavy rainfall that exceeds the capacity of surface water drains or soakaways.
-
Surface water flooding response
— Emergency response to rainwater flooding from blocked or overwhelmed surface water drains.
